AC Contactor Modules Atex

The AC contactor modules Atex & IECEx, are devices to control circuits or motor circuits permiting or not allowing the operation of the circuit. These contactor can be used in branch circuits to control lighting, heating, appliances, motors and similar circuits.
These contactors guarantee the safety of the technical staff who work with them, because these contactors can work at really high or low currents. In addition these devices are far from the controlled equipment, thus increasing safety.
Enclosed in a waterproof antirust box with AISI 304L stainless steel. This design allows use of the device in protected spaces with high explosion risk, so obtaining, the “Ex e” and “Ex d” protection for use in potentially explosive atmospheres of dust and gas.

This product has the following certificates

Description

The AC contactor modules Atex & IECEx, are devices to control circuits or motor circuits permiting or not allowing the operation of the circuit. These contactor can be used in branch circuits to control lighting, heating, appliances, motors and similar circuits.
These contactors guarantee the safety of the technical staff who work with them, because these contactors can work at really high or low currents. In addition these devices are far from the controlled equipment, thus increasing safety.
The contactor allows the control of one machine from different places, wich it means less time spent on mantenance.
Enclosed in a waterproof antirust box with AISI 304L stainless steel. This design allows use of the device in protected spaces with high explosion risk, so obtaining, the “Ex e” and “Ex d” protection for use in potentially explosive atmospheres of dust and gas.
We have two types of closures:

Screw closure (Geoex)
Hinged closure (Luxorex)

Download all documents and certificates

Product

Do you need extra info?
In DELVALLE, WE make IT EASY for you

Discover the advantages

The rated voltage is 690V and the rated current is 38A.

The auxiliary contact rated voltage is 690V and the rated current 10A.

It can work between two temperature ranges, which give it a higher use capacity:

-20°C≤ Ta ≤60°C

-20°C≤ Ta ≤40°C

About the enclosure:

The joint between the cover and body, are designed to secure a really high degree protection IP66

It’s made of stainless steel AISI 304L.

It includes three nickel plated brass cable glands with “Ex e” protection, two of them in M25 and the other one in M16.

It has wall brackets, being possible to place the enclosure on a wall.

Regulations

ATEX directive and regulation:

ATEX directive 2014/34/EU

EN 60079-0:2012

EN 60079-1:2007

EN 60079-7:2015

EN 60079-31:2010

Normativa IECEx:

IEC 60079-0:2011

IEC 60079-1:2006

IEC 60079-7:2015

IEC 60079-31:2013

Enclosure regulation:

IP regulation (IP65): IEC 60529
IK regulation (IK10): IEC 62262

Low voltage directive and regulation:

Directive 2006/95/EC

EN 61439-12011

EN 61439-22011

Applications

Specially designed for the following areas where facilities require additional safety atex:

Oil & gas
Offshore & high sea
Industry and automation
Chemical and refineries
Pharmaceutical
Maritime and port
Fieldstations
Food & Beverage
Paper industry
Air transport
Nuclear and renewable

And in general, hazardous areas and explosive atmospheres where flameproof equipment are necessary.

Custom Made Solutions
We offer multiple solutions

Do you need ATEX solutions?

Atex Delvalle has the solution

2024 product catalogues

Download Zone

We have two types of closures:

Screw closure (Geoex)
Hinged closure(Luxorex)

A normally open and closed auxiliary contact can be added.
5 extra terminals between 1 and 2.5 mm2 can be added.
Possibility of choosing voltage between: 24, 36, 48, 110, 220-230 and 380-400V.
Possibility of choosing current between: 12, 25 and 38.
Box can be made in AISI 316L stainless steel for marine or highly corrosive places.
Cable glands available in any size and thread and in stainless steel.