ATEX VORTEX Enclosure Coolers from Delvalle are designed specifically for purged electrical enclosures in ATEX Zones 2 and 22, and Temperature Class T4 areas.
The ATEX VORTEX incorporates the most up-to-date features into Vortex’s line of highly reliable, cost effective enclosure coolers.
The ATEX VORTEX is an ideal accessory for a pressurized enclosure Ex, it is a solution for varied sectors.
FEATURES AND BENEFITS
- Can be mounted on top or side of enclosure
- Small footprint fits on all enclosures
- Thermostatically controlled via mechanical thermostat
- Requires no wiring, can easily be installed in minutes
- No ambient, dirty, or humid air enters the enclosure
- Designed to cool environments quietly
- Significantly lower cost, compared to ATEX Certified air conditioners
- Contains no moving parts, resulting in very little required maintenance
- Reduce energy use
- 5 minute install
- Reduce noise levels
- 62 dBA operation, 78% quieter than typical vortex cooler
TECHNICAL DATA
Pneumatic parameters
- Protective gas supply Instrument grade air
- Pressure requirement 2…. 6.9 bar regulated
Ambient conditions
- Ambient temperature -20°C to 40°C
- Maintaining the temperature between 26°C (80°F) and 35°C (95°F) through mechanical thermostat
- Inlet aire max temperature 49ºC
Mechanical specifications
- Connection type Pneumatic: 3/8” NPT (female)
- Protection degree IP66
Data for applications in Connection with Ex-areas
- EC type examination certificate EX II 3 GD T4
- ATEX certified for: Zones 2 and 22
- Temperature classification: T4 Class
Directive conformity
- Directive 94/9/EC EN 13463-1:2009
Internal approvals
- UL approval cULus
- Class I, Division 2, Groups A, B, C and D;
- Class II, Division 2, Groups F and G; Class III